ELECRAFT KBPF3 Dokumentacja Pobierz pdf (Strona 7)

Installation Procedure

Disconnect power and all cables from your K3.

Remove the nine screws to free the top cover as shown in Figure 1. After the cover is open, lift it gently to

reach the speaker wire connector. Unplug the speaker then set the top cover aside in a safe place.

REMOVE 9 SCREWS

HOLDING TOP COVER.

TO OPEN COVER, PRESS HERE TO TILT FRONT EDGE UP OR PLACE UNIT

ON ITS SIDE FEET, THEN TIP FARTHER SO THE TOP COVER SWINGS OPEN.

Figure 1. Removing K3 Top Cover.

CAUTION:

Touch an unpainted metal ground or wear a grounded wrist strap

before touching components or circuit boards inside the K3. See Preventing ESD Damage

page 4 for more information.

1 2 3 4 5 6 7 8 9 10 11

Brak uwag

ELECRAFT KBPF3 Dokumentacja Strona 7